Use this quick setup flow to prepare the V380 Pro app and connect directly to the camera without using the camera's device QR code. The direct connection uses the camera's own Wi-Fi hotspot, typically identified by a name beginning with MV.
Get the V380 Pro App
Two download methods are available:
- Search for V380 Pro in your device's app store.
- Scan the app download QR code shown below.

App Permissions
[checklist] * Install and open the V380 Pro app * Allow the permissions needed for local device discovery when prompted * Keep Wi-Fi enabled while adding the camera [/checklist] [note] Some app versions may request Location or Local Network access during device discovery. Permission names and prompts can vary by phone and app version. [/note]Short-Range Mode
Short-range mode creates a direct point-to-point connection between the phone and the camera using the camera's Wi-Fi hotspot.
[reference] Title: Camera Hotspot Text: Look for a Wi-Fi network beginning with MV when connecting directly to the camera. Title: Local Connection Text: This mode connects the phone directly to the camera instead of relying on the normal router connection. [/reference]Power the Camera
Connect the camera to its power supply and allow about one minute for startup. In the referenced setup flow, the ready state is indicated by a red status light. Indicator behavior may vary between camera versions.
[warning] If the camera does not reach its expected ready state, use reset only when necessary and follow the reset method intended for your camera version. [/warning]Phone Wi-Fi Settings

Find the Camera in V380 Pro

Camera Credentials
The camera's device username and password are separate from the V380 Pro app account. If device credentials are requested, treat them as credentials for that individual camera rather than the app login.
When multiple cameras are added, each camera can have its own device credentials.
Switching Connection Mode
After the direct point-to-point connection is available, compatible camera versions may provide a WiFi station mode or similarly named network option. This is used when moving from the camera's direct hotspot connection to a router-based Wi-Fi connection.
[note] Network-setting names can vary between camera hardware and V380 Pro app versions. Use the matching network or station-mode option shown for your device. [/note] [troubleshoot] Problem: The camera does not appear after refreshing the device list. Cause: The phone may not be connected to the camera's MV hotspot, or local device discovery permission may not be available to the app. Fix: Confirm the MV Wi-Fi connection, return to V380 Pro, allow the relevant local discovery permission if prompted, and refresh the device list again. [/troubleshoot]